The Level Sentry

THE LEVEL SENTRY - OVERVIEW
The purpose of this instrument is to provide an accurate level reference prior to lifting or lowering any object that it is mounted to. Dual 95 lb. magnets provide plenty of holding power for mounting on a vertical metal surface. The unit may also be "armed" and will alarm if tilted more than one quarter degree from that position.

THE LEVEL SENTRY - SPECIFICATIONS:

• “Level Sentry” Safety Level
• Better than 0.030 degree resolution
• Range for monitoring : +/- 1.5 Degrees
• Range for operation : +/- 10 Degrees
• 2.6 amp hour lead acid battery reserve
• Low current draw design allows 36 hours run time
• Low battery warning light illuminated for remaining 6 hours
• Float style charger as to not overcharge battery
• Aircraft quality high visibility 10mm fresnel LED lenses
  
• (30 degree viewing angle)
• .25 degree incremental visual and audible indication during jacking
• .25 degree visual and audible indication during sag detect
• Dual sag detect audible alarms for redundancy
• Dual 95lb. magnets for wall mounting only
• Welded and sealed steel enclosure for outdoor use
• Laser cut flat panels
• Laser etched front panel
• Silicon conformal coating over circuit board
• Proudly built in United States of America

THE LEVEL SENTRY - SENSOR SPECIFICATIONS:

• NO MOVING PARTS
• Temperature range: -40 to 85 degrees C.
• Typical accuracy: +/- 0.25% full scale
• Frequency response: 0.5 hertz.
• Resolution: .001 degree
• Linearity: +/- 0.1 degree
• Cross axis error: < 1%

THE LEVEL SENTRY - WARRANTY
One year on all parts.
One year on all labor.
Limited to replacement or repair of Level Sentry.
Not responsible for damages due to misuse or negligence.
Shipping not included.
This product 100% built and serviced by CPE Robotics in the USA.
All parts stocked for repairs.
24/7 phone service
24 hour repair turn around (with RMA)